PullSwitch Stations
The pullswitch is made from a high impact, polycarbonate material, with 25 years track record in underground coal mines.

It is fully sealed with an IP rating of IP56, with inbuilt reflective eyes when in a lockout position. All pullswitches are usually pre-mounted with a transmitter for indication and mounted onto a galvanised back plate.

The pullswitch stations are usually spaced every 150 - 175 metres apart and can be posted on both wallside, or non workside section of the conveyors. This unit uses a single core pullwire cable along the length of the conveyor. The pullswitch station can be used as an E-stops or combined with the communication station, which would alternate every other pullswitch station.

PullSwitch Stations with visual indication:

For fully monitored pre-start alarm pullswitch station with visual indication.

PullSwitch Stations with Audio indication:

For fully monitored pre-start alarm pullswitch station with audio alarm output.

PullSwitch Stations with both Audio and Visual alarms:

For fully monitored pre-start alarm pullswitch station with a combination of both audio and visual indication.

Learn more about this product by clicking on the brochure below:

CLEARCOMMDATA Single Cable Industrial Intercom Prestart Alarm and Signalling System